SZ CnAuto automation equipment Co., Ltd.

作者:中制自動化 點擊量:102

Motor is the power source of automatic dispensing machine. If the motor does not reset, it will no longer be able to dispense glue normally. What causes the motor to not reset?Can be judged from the use time period, each motor also has a life span, which .

作者:中制自動化 點擊量:134

Visual dispensing machines are trusted by many manufacturers. When receiving the phone, many will ask if there is a visual dispensing machine, see the market reaction, it is very strong. In fact, the application of visual dispensing equipment can be very .

作者:點膠機 點擊量:137

How to remove the dispensing? In fact, this is a problem that many manufacturers are facing because they dont know how to operate. Today, let me explain to you how to remove the dispensing glue. In fact, this is related to the characteristics of glue. Bec.

作者:點膠機 點擊量:86

In fact, the air pressure adjustment of automatic solder paste dispenser is very simple. Generally, the dispensing syringe will be used and the adapter will be connected to the dispensing syringe. The air pressure is controlled by the dispensing controlle.

作者:點膠機 點擊量:230

The dispensing and soldering can be synchronized. After dispensing, I can carry out product soldering in the way of assembly line. Before that, the coordination effect was not very good, and there was no way to fully connect the two. Then I introduced a n.

作者:點膠機 點擊量:117

At present, many circuit board manufacturers choose automation equipment operation, including glue dispensing, soldering machine and screw machine. These three machines can replace manual work. Generally, before soldering, solder paste is needed. After fi.

作者:點膠機 點擊量:170

Dispensing core machine is a kind of machine which can carry out dispensing and automatic chip loading. Our company has produced this kind of machine. In addition to the configuration of three axis machine platform, there is also a manipulator auxiliary p.

作者:點膠機 點擊量:152

Dispensing equipment must be purchased from the machine manufacturer. Your company has a factory specialized in manufacturing dispensing and filling automation equipment at No. 1, LiuJie, 128 Industrial Zone, Tangxia Town, Dongguan City. A large number of.

作者:點膠機 點擊量:229

Many products in the domestic market need to be sprayed, sealed, glued and glued. In order to improve the product stability, the product bonding effect will greatly affect the product practicability, such as: household appliances using polyurethane fi...

作者:點膠機 點擊量:144

How can wire drawing be done with glue gun? Wire drawing will be caused by the following several situations, according to our company's experience in the use of dispensing gun, the paper summarizes several situations, which will lead to wire drawing of gl.